FREQUENTLY
ASKED

Yes. We carry out complete rewires for older homes that no longer meet current Australian standards, and partial rewires for renovations. We'll provide a full quote after an on-site assessment.

Absolutely. Adding powerpoints is one of our most common domestic jobs — we can run new circuits from the switchboard or extend existing ones, all to AS/NZS 3000 standards.

A residential electrical safety inspection checks wiring, switchboard, earthing and RCDs for compliance and hazards. Recommended when buying a home, after storm damage, or if the property hasn't been inspected in 5+ years.

Yes. We regularly schedule commercial jobs after hours or on weekends to minimise disruption to trading hours — just let us know your requirements when booking.

Yes. We manage all electrical aspects of commercial fitouts from design and specification through to certification — powerpoints, lighting, data, air conditioning and switchboard work.

Yes. We carry out periodic verification testing for commercial premises and issue the required compliance documentation for your records and insurance.

We install IP-based CCTV systems with remote viewing via smartphone — suitable for homes, retail, offices and industrial sites. We can advise on camera placement to maximise coverage.

Yes. We work with popular smart home platforms to integrate security cameras, alarms and access control into a unified system you can manage from one app.

Yes. We install and configure alarm systems for commercial premises, including monitored alarms for after-hours protection.

LED downlights use 75–85% less energy than halogen equivalents, run cooler (reducing fire risk), last 25,000+ hours and produce better quality light. The payback period on most Gold Coast homes is under 3 years.

Yes. We install dimmable LED downlights using compatible leading-edge or trailing-edge dimmers — and we'll test the combination to ensure flicker-free performance before we leave.

Yes. Pendant installations over kitchen islands and dining tables are a speciality — we ensure the pendant is centred, at the correct height, and properly supported in the ceiling structure.

Yes. We run Cat6 cabling from a central patch panel or router location to every room you need — giving you wired internet speeds and reliability that Wi-Fi can't match.

Yes. We can install or relocate the NBN equipment mounting point, run internal cabling to your preferred router location, and ensure your internal network is configured for best performance.

Yes. We install and upgrade TV antennas, run coax cabling to multiple rooms, and connect distribution amplifiers for multi-point setups.

We install Level 2 AC chargers (Type 2 connector) for home and commercial use — typically 7.4kW single-phase or 22kW three-phase. These charge most EVs fully overnight from a flat battery.

It depends on your existing switchboard capacity. We assess your current electrical load and advise whether an upgrade is required before committing to a quote.

Yes. We design and install multi-bay EV charging infrastructure for car parks, commercial premises and fleet depots — including load management systems to prevent overloading the supply.

Residential split systems benefit from a professional service every 12 months — cleaning filters, coils and drains, and checking refrigerant levels. Commercial units used heavily may need servicing every 6 months.

We inspect switchboards, test RCDs and circuit breakers, check earthing, inspect visible wiring and connections, and test any safety systems — then provide a written report with findings.

Yes. We carry the relevant refrigerant handling certifications and can check and top up refrigerant levels as part of a service visit.