Lighting & Design in Brisbane

Yes — lighting design and installation go together for us. For new builds, renovations, and significant lighting refreshes we'll walk through the spaces with you, talk about how each room is used (work, relaxation, entertaining, sleep), and put together a plan that combines ambient, task, and accent lighting. The plan is presented as a simple sketch over your plan or floorplan, with fittings selected, before any cable goes in. That way you can see what you're committing to and adjust before there's a hole in the ceiling.

Yes. Most rooms benefit from dimming, both for atmosphere and for energy use, and we'll specify suitable dimmable drivers and switches. For smart lighting we work mostly with mainstream systems (Clipsal, HPM, Wiser, Philips Hue) — we don't push proprietary ecosystems that lock you in. The system is set up to work first as a standard wall-switch installation, with smart features as a layer on top. That way if your phone app stops being supported in five years, the lights still work the way they always did.

Most homes we visit are over-lit by a margin — too many downlights, all on one circuit, all at the same brightness. The simple fixes: split the lighting into zones so you can turn off what you don't need; mix downlights with pendants, lamps, and wall lights so the light comes from multiple heights; and put dimmers on circuits where you actually use a range of brightness. We'll talk through this when we walk the site so the design works for your routine, not against it.

Yes — see our outdoor lighting page for the longer answer, but in short we cover landscape and garden lighting (low-voltage in the gardens, mains-voltage on hard surfaces), pathway and step lighting, security and motion-activated lighting, and feature lighting for trees, water features, and outdoor entertaining areas. The design considerations differ from indoor lighting (weather-sealing, glare, light spill onto neighbours) and we factor those in before we quote.

Yes — and this is one of the most worthwhile upgrades you can do in an older Brisbane home. Halogens run hot, draw a lot of power, and the fittings deteriorate. Modern LED retrofits use a fraction of the energy, last years longer, and run cool enough that they're safer when you've got insulation in the ceiling above. We replace the fittings and drivers as a unit — not just the bulb — and step-test each one before we leave so you know they're behaving.

Inner-west Brisbane has a lot of pre-war Queenslanders and timber homes where surface-mounted modern downlights would look out of place. We'll work with you on fittings that suit the period — surface-mounted batten holders, pendant lights, wall sconces, and fittings that respect the architecture. Cabling in heritage homes also needs more care to minimise visible runs, especially in homes with timber-lined ceilings. Both of these add a bit of time to the install — we'll factor that into the quote upfront.