Patched, sanded and ready to paint — Brisbane South West
Holes, cracks and surface damage get worse if you ignore them — and a badly done DIY patch is often more visible than the original damage. I repair plasterboard and plaster walls properly: the right filler, sanded flush, primed, and left ready for your painter or your own touch-up coat.
Victor has been fixing walls around Brisbane South West for 8 years. The result from a single nail hole to a large punch-through is the same: smooth, flat, and invisible under paint.
Nail and screw holes, fist-sized holes in plasterboard, cracks in plaster, screw pops, corner bead damage, and surface gouges. Both plasterboard (drywall) and old-style plaster walls.
Yes — I fill, sand, and prime so it's flush and smooth. With a coat of paint over the top it should be invisible. The final painting is separate (unless booked as a touch-up), but I leave it ready for paint.
Yes. Larger holes require a patch backing and mesh tape before filling. The result is just as clean — it takes a bit longer but the finish is solid and smooth.
I match smooth and lightly textured surfaces well. Heavily textured or stippled finishes are harder to match exactly — I'll advise honestly and get as close as possible.
Yes — painting touch-ups are available as a separate service. Bring the original paint if you have it, or I can advise on colour matching.
Yes — batching repairs in one visit is the most cost-effective approach. List everything that needs doing and I'll cover it in one trip.
Filler typically needs 2–4 hours to dry before sanding, and primer another hour. I'll give you a timeline at the start of the job so you can plan ahead.
Richlands, Redbank, Kenmore, Acacia Ridge, Spring Hill, Mt Gravatt and surrounding Brisbane South West suburbs.